Posts Tagged ‘Error’

Error code 0x80041161 Windows Live Mail 2011

October 27, 2012 Leave a comment


You can try this very simple workaround and see whether it works for you. Just need few minutes & no technical at all.

There is a repair program in Windows Live folder. Go to Program Files (x86)\Windows Live\Installer\

and look for wlarp.exe

x2 click and run the repair. You should be able to open WLM2011 when the repair is completed.

Hope this helps & good luck.

Have fun ūüôā


Categories: Technical Tags: , ,

how to remove /Temp/g0dllp.exe

November 24, 2010 Leave a comment

When you see this when booting up your windows :

“Could not load or run ‘C:/DOCUME~1/Owner/LOCAL~1/Temp/g0dllp.exe’ specified in the registry. Make sure the file exists on your computer or remove the reference to it in the registry.”

Sorry to say that your windows is infected by trojan horse.

The extremely powerful combofix can get rid of this once and for all.

Note:  only for those with technical knowledge.


Stop: 0x0000008E Application Error

January 7, 2010 Leave a comment

Today, I gonna share with you my experience on 0x0000008E thingy.

1. Open the computer case

2. Unplug all the DDR module

3. I use QPlus & spray to a cotton bud

4. Then I use the cutton bud to clean the contact point of the DDR, both side

5. Then I use a small brush & spay some QPlus into it

6. Then I use the brush & clean up the RAM slot in the motherboard, all slots

7. After that I insert back all DDR module into the slot

8. Power ON the computer

9. Stop: 0x0000008E Application Error NO MORE !

Try this 1st before you uninstall or tweak with your programs.

Hope this helps.

Have a nice day ūüôā

Categories: Technical Tags: , , ,

Message number: 32777

June 10, 2008 30 comments

A quick one.

Check the system date & time and reset it to current date & time.

You should be able to activate your Windows XP.

Message number: 32777 when try to perform Windows Activation via internet

Full message :

Unable to establish a connection with the activation server. Please check your network settings and confirm that you are able to connect to the internet, then try again.

Message number: 32777

Categories: Technical Tags: , ,

Uninstall WinFax Pro

June 4, 2008 3 comments

If you tried to remove WinFax Pro and failed. Here is the workaround for Windows XP users.

1. Go to Control Panel > Add/Remove Program Programs

2. Remove WinFax Pro

3. Restart the PC & Follow the instructions.

4. Download Norton Removal Tool and Run it.

This will completely wipe out the program.

Categories: Technical Tags: , ,

CAPI_Worker Module reports error in Windows XP

May 20, 2008 4 comments


Basically the error reports PC Suite software was looking for COM ports and it cannot find any in your system. So the error appears.

To stop this, simply add a COM Port to your system.

Below are the workaround.

> Control Panel. 
> Add Hardware
> Next
> Yes, I have already connected the hardware
> Add a new harware device
> Install the hardware & manually select from a list (Advanced)
> Ports (Com & LPT)

> Left Box click (Standard port types)
> Right Box click Communications Port
> Next. Next, Finish

After that, just restart the system. The CAPI_Worker Module found the port that it needs.

Happy trying & Good luck !

Categories: Technical Tags: , ,

Dell Desktop PC – error message while booting up

March 26, 2008 2 comments

I came across this message in Dell Dimension 4300 while trying to boot up.

¬†“Previous attemps at booting this system have failed at checkpoint (Time). For help in resolving this problem, please note this checkpoint and contact Dell Technical Support.”

Sometimes, it just stop responding at Dell’s blue¬†logo.¬†No way to hit the F2 & F12 key. It’s just hang there.

I am quite certain that the motherboard is malfunction. HDD, FDD, CDROM & RAM is able to work in other system.

Any suggestions ?

Note : Diagnotic Codes from Dell.

Categories: Technical Tags: ,